| Model | G | G-Flanged PN16 | G-Flanged PN25 | G-Flanged 250 |
| Connection Sizes |
1/2″ (15 mm) 3/4″ (20 mm) 1″ (25 mm) 1-1/4″ (32 mm) 1-1/2″ (40 mm) |
2-1/2″ (65 mm) 3″ (80 mm) 4″ (100 mm) 5″ (125 mm) 6″ (150 mm) 8″ (200 mm) |
1/2″ (15 mm) 3/4″ (20 mm) 1″ (25 mm) 1-1/4″ (32 mm) 1-1/2″ (40 mm) 2″ (50 mm) 2-1/2″ (65 mm) 3″ (80 mm) 4″ (100 mm) 5″ (125 mm) 6″ (150 mm) 8″ (200 mm) |
2-1/2″ (65 mm) 3″ (80 mm) 4″ (100 mm) 5″ (125 mm) 6″ (150 mm) 8″ (200 mm) |
| Connection Type |
Integral Flanged |
Integral Flanged |
Integral Flanged |
Integral Flanged |
| Body Material |
Ductile Iron ASTM A395 60-40-18 |
Ductile Iron ASTM A395 60-40-18 |
Ductile Iron ASTM A395 60-40-18 |
Ductile Iron ASTM A395 60-40-18 |
| Pressure Temperature Rating | ||||
| Steam Non-Shock |
210 psig@392°F (14 bar@200℃) |
210 psig@392°F (14 bar@200℃) |
320 psig@419°F (22 bar@215℃) |
510 psig@470°F (35 bar@243℃) |
| Cold Non-shock |
230 psig@151°F (16 bar@66℃) |
230 psig@151°F (16 bar@66℃) |
360 psig@151°F (25 bar@66℃) |
580 psig@151°F (40 bar@66℃) |
G Series PN16 Flanged Y-Type Strainers feature screen chambers that won’t leak or crush. Both ends of the chambers are precisely machined. This means perfectly round and smooth seating surfaces, as well as a fixed chamber length. Since the screen seats snugly on the machined surface, no particle bigger than the screen opening can escape around the end of the screen.
Straight threads mean it takes less torque to achieve a tight seal with proper gasket compression. Less torque is also required to remove the retainer. For you, that means less danger of “freezing in” than with hard-to-break tapered pipe threads.
Many screen materials, meshes and perforations are available.