Flo-Rite-Temp® Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems | Armstrong | Americas

Flo-Rite-Temp® Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems

Flo-Rite-Temp<sup>®</sup> Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems

Product Specifications

Model Flow Capacity Hot Water Outlet Connection Size
FRT535R 35 gpm (132 lpm) 1-1/2″ (38 mm)
FRT665R 63 gpm (238 lpm) 2″ (51 mm)
FRT8120R 120 gpm (454 lpm) 3″ (76 mm)
FRT535DWR 35 gpm (132 lpm) 1-1/2″ (38 mm)
FRT665DWR 63 gpm (238 lpm) 2″ (51 mm)
FRT8120DWR 120 gpm (454 lpm) 3″ (76 mm)
FRT535PR 70 gpm (265 lpm) 2″ (51 mm)
FRT665PR 126 gpm (477 lpm) 3″ (76 mm)
FRT8120PR 240 gpm (908 lpm) 3″ (76 mm)
FRT535DWPR 70 gpm (265 lpm) 2″ (51 mm)
FRT665DWPR 126 gpm (477 lpm) 2″ (51 mm)
FRT8120DWPR 240 gpm (908 lpm) 3″ (76 mm)

Flo-Rite-Temp® Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems

Flo-Rite-Temp Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems are factory-built water heating packaged solutions inclusive of a shell & tube heat exchanger fitted with an integral control valve for water heating and system temperature control.

The feed forward design instantly determines downstream hot water demand and directs cold water through the heat exchanger. Water is heated above legionella survival temperatures with constant pressure steam and then blended with a proportional amount of cold water to set point temperature.

Engineered specifically for recirculating hot water systems, the piping assembly includes a three-way thermostatic diverting valve.

Flo-Rite-Temp Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems are available with single wall or double wall heat exchangers in 4 standard sizes each with a parallel/redundant option and can be customized to suit.

Resources

Installation and Maintenance
Drawings - Single Wall Models
Drawings - Double Wall Models
Specifications
Data Sheets
Case Studies