Product

Flo-Rite-Temp® Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems

Flo-Rite-Temp Pre-Piped for Thermostatic Control of Recirculating Hot Water Systems are factory-built water heating packaged solutions inclusive of a shell & tube heat exchanger fitted with an integral control valve for water heating and system temperature control. The feed forward design instantly determines downstream hot water demand and directs cold...

Product

Flo-Rite-Temp® Pre-Piped for Digital Control of Recirculating Hot Water Systems

Flo-Rite-Temp Pre-Piped for Digital Control of Recirculating HW Systems are factory-built water heating packaged solutions inclusive of a shell & tube heat exchanger fitted with an integral control valve for water heating and system temperature control. The feed forward design instantly determines downstream hot water demand and directs cold water...

Product

Flo-Direct® Gas Fired Water Heaters

Flo-Direct® Gas-Fired Water Heaters are a series of high-efficiency, compact, stainless-steel water heaters. The Flo-Direct® series is remarkably dependable, simple in design and operation, and suitable for a wide variety of hot-water applications. Flo-Direct® is available in standard operating capacities between 1 million and 10 million BTU per hour, and...

Product

ReadiTemp®

Advanced hot water system with digital control technology and instantaneous shell and tube heat exchanger design. ReadiTemp® was designed to meet higher set point temperature process applications such as closed loop vessel jacket heating and centralized plant sanitation. We combined our state-of-the-art digital water temperature control technology with our instantaneous...

Product

Thermostatic Drain Valve – Model ASDV

Model ASDV (Ambient Sensing Drain Valve) is deal for protecting piping, valves, fittings, pumps, condensate systems, safety showers, fire lines, spray nozzles and freeze-sensitive equipment. It also can be used to provide back-up protection on steam-traced systems or equipment. The valve features an all-stainless steel body, fittings, spring and plug....

Product

Sight Glass

As a pipeline monitoring device, Armstrong sight glasses can be widely applied in the petrochemical, chemical, pharmaceutical, food or other industries. The sight glass allows you to view flow status such as presence of fluid, flow direction, and flowrate. This allows you to confirm the working condition of in-line control...

Product

Safety Valve – Model 095-AP

The Model 095-AP proportional safety valve is an automatic pressure relief device activated by static pressure existing at the inlet and outlet of the safety valve, which is characterized by the ability to open proportional to the pressure increase. The product is recommended for use in saturated steam, general gas...

Product

Safety Valve – 496-AP

The 496-AP Series full lift safety valve is an automatic pressure relief device activated by the static pressure present at the inlet and outlet of the safety valve. The product is recommended for use in saturated steam applications.

Product

Safety Valve – AL-140 Series

AL-140 Series safety valves are a high-quality, safety device. Metal-to-metal sealing ensures excellent corrosion resistance. Can be widely used in steam, air, water, oil and non-corrosive liquids.

Product

Safety Valve – AL-150 SERIES

AL-150 Series safety valves are a high-quality, safety device. Metal-to-metal sealing ensures excellent corrosion resistance. Can be widely used in steam, air, water, oil and non-corrosive liquids.

Product

Standard Safety Valve – AL-4 Series

The AL-4 Series can be used as a safety valve after a pressure reducing valve, and can be used in small boilers and various pressure vessels. The recommended application is steam. Metal-to-metal seals provide excellent corrosion resistance.

Product

Free Floating Lever Drain Trap – 1/2/3/6-LD Series

Armstrong’s cast iron, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats as Armstrong inverted bucket steam traps that have been proved in years of service. Elliptical floats and high leverage make it possible to open large orifices to provide adequate capacity for drain...

Product

High Leverage Spring-Loaded Float Type Drain Trap – HLS Series

Armstrong HLS (High Leverage Series) liquid drain traps were developed especially for draining low specific gravity fluids from gases at high pressures. They use standard Armstrong forged steel bodies with very high leverage systems and spring assist. NOTE: Models 2313-HLS, 2316-HLS, 2413-HLS and 2415-HLS are also available with cast T-316...

Product

Free Floating Lever Air/Gas Vents – 30 Series

30 Series air/gas vents are forged steel, using the same proven free-floating lever mechanisms used in Armstrong steam traps. They are ideal for applications where high air/gas venting capacity is required, up to 1,000 psi (69 bar). They are available with screwed, sockeweld or flanged connections. HIGH-TEMPERATURE SERVICE Maximum allowable...

Product

VERIS Verabar®

The Verabar® provides the most accurate, reliable technology for measuring gas, liquid and steam as well as the lowest operating and installation costs. How it Works When a fluid impacts the sensor, it creates a high-pressure zone in front of the sensor. As the fluid accelerates around the sensor, a...

Web Page

Industrial Hot Water

Gas or steam, Armstrong offers the state-of-the-art instantaneous hot water generation, distribution and precision temperature control you need.

Web Page

Trap Management Services

Sustainable, proactive trap management, engineered to maintain low trap failure rates for better efficiency, productivity & lower CO2 emissions.

Web Page

Effective Trap Surveys

Armstrong helps you improve efficiency, safety, productivity and profitability with reliable, accurate steam trap surveys and real-time monitoring.

Web Page

Flow Measurement

Armstrong's advanced flow measurement technology for steam, liquid and gas delivers exceptional accuracy and reliability in any application.

Product

Free Floating Lever Air/Gas Vents – 11/22/13-AV Series

The Armstrong all-stainless steel guided lever air vents have been developed to provide positive venting of air/gases under pressure. The body and cap and all working parts of the No. 11-AV, 22-AV and 13-AV are made of high-strength, corrosion-resistant stainless steel. Body and caps are welded together to form a...

Web Page

SAGE® is Fully Integrated

An integral part of your complete steam or hot water system management program, SAGE® communicates seamlessly with our real-time monitoring products.

Web Page

SAGE UMT® Trap Tester

Our state-of-the-art, wireless, handheld steam trap testing device eliminates human error and raises the quality of trap surveys to a new level.

Product

ARMSTRONG+COMBITHERM Heat Pump Systems

ARMSTRONG+COMBITHERM Heat Pumps provide a custom-engineered, package solution that delivers high-efficiency heating, cooling and hot water generation. Our heat pumps deliver superior thermal efficiency, de-steaming, and decarbonization by reclaiming your wasted heat and putting it to work where you need it most—as a replacement for purchased fuel. The ARMSTRONG+COMBITHERM Heat...