You searched for hot water studies - Page 4 of 4 - Armstrong | China

Product

Clean Steam Generator

The Armstrong Clean Steam Generator uses industrial steam as a primary heat source to heat RO water to generate low-pressure clean steam. The resultant clean steam meets EN285 related requirements for “Sterilization – Steam Sterilizers – Large Sterilizers” in the food, beverage, pharmaceutical, electronics, chemical and healthcare industries. Armstrong Clean...

Product

Electric Steam Humidifier – EHU-800 Series

The EHU-800 Series electric steam humidifier converts ordinary tap water to steam and distributes it to bring the relative humidity up to the desired level. It’s ideal for providing humidification where no steam is available or where a steam source is too remote for easy or economical piping. The EHU-800...

Product

HumidiClean™ Ionic Bed Electric Steam Humidifier

The HumidiClean™ HC-6000 electric steam humidifier features revolutionary ionic bed technology that minimizes buildup of solids on inner tank walls and heating elements. As a result the HumidiClean™ HC-6000 delivers less scale, greater efficiency, and energy savings. The ionic beds in the HumidiClean™ HC-6000 are made of a fibrous medium...

Product

Electric Steam Humidifier – ERS Series

The ERS Series is heater-type steam humidifier, designed to provide sterile steam for applications requiring precise and sanitary humidification. This is the only humidifier with a tilting tank allowing easy and fast maintenance. Armstrong  ERS Series humidifiers operate on potable tap water, and are ideal for providing humidification where no...

Product

Stainless Steel Direct Steam Humidifier – 2000 Series

The 2000 Series stainless steel humidifier is the ideal choice for sensitive environments where pure demineralized, deionized or distilled water is used to generate clean steam. Lightweight and flexible in configuration, the 2000 Series can be applied to a wide range of steam pressures.

Product

Atmospheric Steam Manifold – D Series

D Series atmospheric steam manifolds, or dispersion tubes, are intended for duct-type distribution. Where an existing duct system is available, steam is commonly discharged into the duct through a dispersion tube. If the dispersion tube is to be located below the humidifier, install a drip leg with water seal. NOTE:...

Product

Radiator Trap – TS-2/TS-3 Series

Armstrong TS-2/TS-3 Series radiator traps are offered in both angle and straight patterns. The TS-2 has a balanced pressure thermostatic element with a high quality multiple convolution bellows. It’s ideal for draining equipment such as steam radiators and convectors, small heat exchangers, unit heaters and steam air vents. The TS-2...

Product

Ultra-Capacity Drain Trap

Armstrong Models JD, KD, L/LS, and M/MS ultra-capacity ball float drain traps are designed to meet exceptionally large capacity needs in draining water and other liquids from air or other gases under pressure. Model L/LS and Model M/MS Series drain traps are available with armored gauge glass with a maximum...

Product

Snap Action Drain Trap – 71 Series

Armstrong’s line of snap action, continuous flow or on-off float drain traps includes two basic models available in cast iron and forged steel. The floats are light enough to handle light liquids. The Model 71-A is a wide-open, tight-shut drain trap for use where fine dirt and grit may be...

Product

Free Floating Lever Drain Trap – 1/2/3/6-LD Series

Armstrong’s cast iron, free-floating guided lever drain traps use the same bodies, caps, lever mechanisms, valves and seats as Armstrong inverted bucket steam traps that have been proved in years of service. Elliptical floats and high leverage make it possible to open large orifices to provide adequate capacity for drain...

Product

See-Through Free Floating Lever Drain Trap – 1-LDC

A free floating mechanism in the 1-LDC needs no electricity to operate. The 1-LDC discharges automatically only when liquid is present. That means no air loss as with timed devices that open even when liquid is not present. Moisture in a compressed air system causes problems. Getting the water out—automatically,...

Product

Safety Valve – AL-150 SERIES

AL-150 Series safety valves are a high-quality, safety device. Metal-to-metal sealing ensures excellent corrosion resistance. Can be widely used in steam, air, water, oil and non-corrosive liquids.

Product

Safety Valve – AL-140 Series

AL-140 Series safety valves are a high-quality, safety device. Metal-to-metal sealing ensures excellent corrosion resistance. Can be widely used in steam, air, water, oil and non-corrosive liquids.

Product

Wedge Flow Meter

Wedge Flow Meters impart all the benefits of differential pressure measurement in difficult fluid applications.  The meter can be used with high viscosity fluids, slurries, asphalt, tar-sands, fracking fluids, spent water, sludge, bottoms flow, cement, or other contaminated or abrasive fluids. Within the cylindrical meter body, an embedded wedge constricts...

Product

Bimetallic Steam Trap For Superheat Conditions – Model SH-2500

The effect of rising temperature on bimetallic elements operates the SH-2500 bimetallic steam trap. It adjusts to changing conditions because the curving of the bimetallic elements, caused by increasing temperature, compensates for increasing pressure. At start-up, the valve is wide open, which allows a large volume of non-condensables and cold...

Product

Thermostatic Air Vents – TV-2

Armstrong offers the Model TV-2 balanced-pressure thermostatic air vent for positive venting of air from chamber-type heat-transfer equipment with no loss of steam. Typical applications include jacketed kettles, retorts, vulcanizers, jacketed sterilizers or other contained equipment where air could accumulate at the top of the steam chamber and reduce heat-transfer...

Product

Thermostatic Wafer Steam Trap – WMT Series

Armstrong’s stainless steel WMT Series thermostatic wafer steam traps are designed to last longer than other oversized, all-purpose thermostatic and thermodynamic steam traps. The WMT Series feature a water seal to prevent loss of steam through the orifice. The steam trap is designed to automatically adjust to flow rates, including...

Product

Thermostatic Wafer Steam Trap – WT Series

Armstrong offers two thermostatic wafer steam traps in the WT Series: The WT-1 is ideal for low-capacity steam tracers and feature an exclusive non-welded wafer design, a sealed stainless steel body and an internal strainer screen two to three times larger than that of other thermostatic traps. Choose from NPT...

Product

Thermostatic Drain Valve – Model CSDV

Model CSDV (Condensate Sensing Drain Valve) is an automatic valve with a thermostatic wax-filled capsule. The valve is designed for winterization of steam tracing, instrument tracing, condensate return line freeze protection or other processes requiring protection under 150˚F (65˚C). The valve has an all-stainless steel body, fittings, spring and plug....

Web Page

Basic Control

Basic Control For EvaPack™ Recirculated Water (RW) Series Cofiguration—Evaporative Pad Adiabatic Cooling & Humidification for Data Centers.

Product

High Capacity Pump Trap – PT-516

The PT-516 High Capacity Pump Trap effectively recovers and returns hot condensate, which is essential to overall plant efficiency and energy conservation.  This low-maintenance, non-electric solution moves large amounts of condensate and other liquids from low points, low pressures, or vacuum spaces to an area of higher elevator or pressure....